International Color Consortium
About ICC
Members
Getting Started
V4
Making color seamles between devices and documents
ICC News Release
ICC Specifications
Technical Notes
ICC Resource Center
ICC Slide Presentation
ICC Logos
Information on Profiles
ICC White Papers
Color Management Links
Member List
ICC Working Groups
FAQ
Forum
Home
Search ICC:
 
Got a question about ICC Profiles or colour management?

sRGB profiles

Introducing the sRGB_v4_ICC_preference.icc profile

The sRGB v4 ICC preference profile is a v4 replacement for commonly used v2 sRGB profiles. It gives better results in workflows that implement the ICC v4 specification. It is intended to be used in combination with other ICC v4 profiles.

The advantages of the new profile are:

  1. More pleasing results for most images when combined with any correctly-constructed v4 output profile using the perceptual rendering intent.
  2. More consistently correct results among different CMMs using the ICC-absolute colorimetric rendering intent.
  3. Higher color accuracy using the media-relative colorimetric intent.
A typical use case would be to print sRGB images captured with a digital still camera. In this case a user could open the image in Adobe® Photoshop®, assign the sRGB v4 profile as shown in Figure 1. Adobe® Photoshop® is either a registered trademark or trademark of Adobe Systems Incorporated in the United States and/or other countries.

Figure 1. Assigning the sRGB v4 ICC preference profile. Adobe product screen shot reprinted with permission from Adobe Systems Incorporated.

The user would then convert the data to printer specific values with the sRGB v4 profile as source, the v4 printer profile as destination, and selecting the perceptual rendering intent, as shown in Fig 2.

Figure 2. Conversion from sRGB v4 ICC preference profile to v4 printer profile in Photoshop using the perceptual rendering intent. Adobe product screen shot reprinted with permission from Adobe Systems Incorporated.

The three available rendering intents of the sRGB v4 profile should normally be used as follows:

  • The ICC-absolute colorimetric rendering intent should be used when the goal is to maintain the colors of the original on the reproduction,
  • The media-relative colorimetric intent should be used when the goal is to map the source medium white to the destination medium,
  • The perceptual intent should be used when the goal is to re-optimize the source colors for the reproduction medium while maintaining the "look" of the source image
The re-optimization performed by the perceptual rendering intent of the profile is a result of using the Perceptual Medium Reference Gamut defined in the ICC v4 specification as an intermediate rendering target. No perceptual reference medium is defined for v2 profiles.

Advice for caution

Ideally the ICC v4 profile should not be combined with ICC v2 profiles. If that is unavoidable, see the intermediate-level ICC White Paper 26 'Using the sRGB_v4_ICC_preference.icc profile' for additional information and recommendations.

The sRGB v4 profile will in some cases not produce the same results as would be obtained using an sRGB v2 profile. Differences will depend on the particular sRGB v2 profile and rendering intent used. See the intermediate level white paper for additional information and recommendations.

Summary Overall users can expect to get better and more consistent results using the sRGB v4 profile versus the sRGB v2 profiles. More details are available in White Paper 26.

sRGB_v4_ICC_preference.icc    
 
This sRGB_v4_ICC_preference.icc profile is a Beta version. Feedback on the performance of the profile (whether positive or negative) would be greatly welcomed. Please send comments to ICC users (Subscribe to ICC users mailing list here.)

v2 profiles

Two ICC version 2 (v2) sRGB profiles are provided below, one with XYZ black point scaling to zero (BPC), and one without. The one with BPC has the preferred rendering intent in the header set to "perceptual". and the one without BPC has the preferred rendering intent in the header set to "relative colorimetric.

Both profiles contain the standard linearized Bradford D65 to D50 chromatic adaptation tag (this tag was often not present in older sRGB profiles), and the media white point tag is set to D50 (as is required for ICC v4 profiles). This avoids the inappropriate color casts that older sRGB v2 ICC profiles frequently produced when the absolute colorimetric intent was used. Otherwise, the profile with BPC is similar to most common sRGB ICC profiles in use.

The profile without BPC produces sRGB colorimetry in the PCS that is more accurate to what a viewer of a sRGB calibrated display will observe in the reference sRGB viewing conditions, especially the dark colors and black point. It should be used in situations where greater colorimetric accuracy is desired, such as for preview and proofing applications, and where CMM color rendering will be applied. Note that both sRGB profiles will produce the same results if BPC (only) is applied by the CMM.

Terms of use

To anyone who acknowledges that the files "sRGB_IEC61966-2-1_noBPC.icc" and "sRGB_IEC61966-2-1_withBPC.icc" are provided "AS IS" WITH NO EXPRESS OR IMPLIED WARRANTY, permission to use, copy and distribute these file for any purpose is hereby granted without fee, provided that the files are not changed including the HP copyright notice tag, and that the name of Hewlett-Packard Company shall not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. Hewlett-Packard Company makes no representations about the suitability of this software for any purpose.

 

sRGB_IEC61966-2-1_noBPC.icc    
 
sRGB_IEC61966-2-1_withBPC.icc